Don’t look straight on the strobe light When it is on to protect your eyes.
Push button ON/OFF
Push button Mode Switch: Strobe, Flash and Constant light
Micro USB Charging
Signal LED for charging status (ON when charging, OFF when full charge)
Auto OFF when full discharge
The Steps to Play
Step1: Attach the two Velcro stickers to the drone and the strobe light with double-sided tape.
Step2:Turn on the strobe light. Switch the three different modes—strobe, flash, and fixed (spotlight) by toggling the button and choose the suitable mode.
Step3: Fix the strobe light to the dronevia Velcro and Start drone flight.
The Strobe light x1
- 1: 3 High Out Cree White Strobe lights together for night navigation
- 2: Lightweight of 10 grams, Install with 3M Mount tape easily and no wire needed.
- 3. Long Time of endurance: Runs for 4+ hours. Rechargeable Lipo battery with indicator and overcharge/discharge protection.
- 4. Three Operating Modes: Strobe, Flash and Constant light state.
- 5. Dustproof and avoid short circuit caused by moisture with a shell.